@INPROCEEDINGS{mine:isscc_2016_ugur,
author={Ugur Sönmez and Fabio Sebastiano and Kofi A.A. Makinwa},
booktitle={International Solid-state Circuits Conference Digest of Technical Papers},
address="San Francisco, CA",
title="1650µm² Thermal-Diffusivity Sensors with Inaccuracies Down to ±0.75$^\circ$C in 40nm {CMOS}",
year={2016},
pages={206-207},
abstract={This work presents a thermal diffusivity (TD) sensor realized in nanometer (40nm) CMOS that demonstrates that the performance of such sensors continues to improve with scaling. Without trimming, the sensor achieves ±1.4°C (3s) inaccuracy from -40 to 125°C, which is a 5× improvement over previous (non-TD) sensors intended for thermal monitoring. This improves to ±0.75°C (3s) after a single-point trim, a level of accuracy that previously would have required two-point trimming. Furthermore, it operates from supply voltages as low as 0.9V, and occupies only 1650 µm2, making it one of the smallest smart temperature sensors reported to date. These advances are enabled by the use of a phase-calibration scheme and a highly digital phase-domain ?S ADC.},
keywords={CMOS integrated circuits;calibration;delta-sigma modulation;temperature sensors;thermal diffusivity;CMOS;digital phase-domain ?S ADC;phase-calibration scheme;scaling;single-point trim;size 40 nm;smart temperature sensors;temperature -40 degC to 125 degC;thermal monitoring;thermal-diffusivity sensors;CMOS integrated circuits;Monitoring;Radiation detectors;Temperature measurement;Temperature sensors},
doi={10.1109/ISSCC.2016.7417979},
month={Jan}}

@INPROCEEDINGS{mine:isscc_2016_burak,
author={Burak Gönen and Fabio Sebastiano and and Robert.van Veldhoven and Kofi A.A. Makinwa},
booktitle={International Solid-state Circuits Conference Digest of Technical Papers},
address="San Francisco, CA",
title="A 1.65m{W} 0.16mm² Dynamic {Zoom-ADC with 107.5dB DR in 20kHz BW}",
year={2016},
pages={282-283},
abstract={Audio codecs for automotive applications and smartphones require up to five stereo channels to achieve effective acoustic noise and echo cancellation, thus demanding ADCs with low power and minimal die area. Zoom-ADCs should be well suited for such applications, since they combine compact and energy-efficient SAR ADCs with low-distortion ?S ADCs to simultaneously achieve high energy efficiency, small die area, and high linearity [1,2]. However, previous implementations were limited to the conversion of quasi-static signals, since the two ADCs were operated sequentially, with a coarse SAR conversion followed by, a much slower, fine ?S conversion. This work describes a zoom-ADC with a 20kHz bandwidth, which achieves 107.5dB DR and 104.4dB SNR while dissipating 1.65mW and occupying 0.16mm2. A comparison with recent state-of-the-art ADCs with similar resolution and bandwidth [3-7] shows that the ADC achieves significantly improved energy and area efficiency. These advances are enabled by the use of concurrent fine and coarse conversions, dynamic error-correction techniques, and an inverter-based OTA.},
keywords={codecs;delta-sigma modulation;energy conservation;error correction;invertors;operational amplifiers;SNR;acoustic noise;audio codec;automotive application;bandwidth 20 kHz;dynamic zoom-ADC;echo cancellation;energy-efficient SAR ADC;error-correction technique;inverter-based OTA;low-distortion ?S ADC;operational transconductance amplifier;power 1.65 mW;quasistatic signal;signal-noise ratio;smartphone;stereo channel;successive approximation register analog-digital converter;Bandwidth;Capacitors;Energy efficiency;Linearity;Modulation;Solid state circuits;Vehicle dynamics},
doi={10.1109/ISSCC.2016.7418017},
month={Jan}}